Pressure Washer Chemical Injector
- High Pressure Side
PN:
68000
Click Here to Download
Product Information and Instruction Guide - PDF version
CLICK "ADD" BELOW TO ORDER ONLINE
Pressure
Washer Chemical Injector - High Pressure Side
PN:
68000
$120.00
USD
Click Here to Download Our Current Price
Guide - PDF version
|
It is designed specifically for
injecting chemicals, soaps and KLEEN KOTE into the water of your power
washing system, this injector simply threads on to the high pressure or
output side of pump. Injecting the chemicals on the output side of the
pump allows you to easily clean your equipment or forms with soaps or
chemicals that normally cannot pass through the power washer's pump.
This injector allows you to easily pre-treat your equipment with KLEEN
KOTE for its next use.
Features
- Two adjustment knobs that change
the water AND the injection flows.
- 8 feet of chemical resistant vinyl
hose.
- All solid brass fittings.
WARNINGS
- CHECK ALL CONNECTIONS AND HOSES
PRIOR TO OPERATION.
- DO NOT USE AN INJECTOR THAT IS
MALFUNCTIONING OR DAMAGED.
- ALWAYS INSTALL ON THE OUTPUT SIDE
OF THE PUMP WHEN INJECTING CHEMICALS OTHER THAN KLEEN KOTE. MOST
CHEMICALS WILL DAMAGE THE PUMP IF INJECTED THROUGH IT.
- WHEN USING KLEEN KOTE THE INJECTOR
MAY BE INSTALLED ON EITHER SIDE OF THE PUMP AS KLEEN KOTE WILL NOT
DAMAGE THE PUMP.
Instructions
Installation Instructions
- The injector may be used on the
upstream or downstream side of the pump.
Step
1 - Upstream Side of the Pump
- For Use with KLEEN KOTE only. Harsh
chemicals will damage your pump when injected through the pump.
- Attach the injector on the upstream
side of the pump.The upstream side covers a flow range from .5 to 3.5
gallons per minute.
Step
2 - Downstream Side of the Pump - Recommended
- For use with harsh chemicals,
detergents and may also be used with
KLEEN KOTE.
- Attach the injector on the
downstream side of the pump.
- The downstream side flow rate is
from 2.0 to 8 gallons per minute with a maximum pressure of 3500 psi
and a maximum operating temperature
of 180 degrees. The downstream use of the injector allows for the most
versatility.
Operation Instructions
- The injector has two adjustment
knobs (fig.1) that change the water flow
and the injection flow. This allows you to use the injector with most
types
of power washers.
Step
1 - Water Flow Adjustment Knob
- The water flow is controlled by
means of an external adjustment knob (fig.2) that allows the injector
to be placed on either the upstream or downstream side of your power
washer.
 - Turning the knob clock-wise will
increase the water flow causing the KLEEN KOTE or other chemicals to be
mixed in at a slower rate - more water, less chemical.
- Turn the knob counter-clockwise
will restrict the water flow causing the KLEEN KOTE or other chemicals
to be mixed in at a faster rate - less water, more chemical.
Step
2 – Injection Flow Adjustment Knob
- The injection adjustment flow is
controlled by another external adjustment knob (fig.3) and allows you
to adjust the amount of KLEEN KOTE or chemicals that are mixed into the
water.
 - Turning the knob clockwise
restricts the flow of KLEEN KOTE or other chemicals into the water
effectively raising the mix ratio - more water, less chemical. Turning
the injector adjustment knob clockwise until it is tight stop the flow
of KLEEN KOTE or chemicals into the water, allowing you to simply
pressure wash something without removing the injector.
- BE AWARE THAT THE GPM OF THE POWER
WASHER TIPS YOU CHOOSE WILL AFFECT THE OVERALL FLOW AND OPERATION OF
THIS INJECTOR. If the injector does not seem to be functioning
properly, the tip GPM may be too low.
- The injection rates are dependent
on gallons per minute and pressure, but the metering barb on the
chemical inlet makes this injector adjustable from 0% to 13%.
- Adjusting the knob to the closed
position (0%) allows you to stop the flow of KLEEN KOTE or chemicals so
you may just use water when power washing.
If you have any questions regarding the operation of this product
please feel free to contact Customer Support by
telephone: 800.801.7832 – 847.639.7272 or via email:
support@4progressive.com.
REV110508
|
|
|
|
|
|
