For Removing Hardened
Concrete From
- Concrete Forms
- Concrete & Mortar Mixers
- Hand Tools
- Precast Equipment
- Ready Mix Trucks
- Saw Cutting Equipment
- Screeds
- Troweling Machines
- Vehicles
Other Uses
- Cleaning and etching concrete floors
prior to appling epoxy coatings or sealers.
- Etching concrete floors to create a
non-slip surface.
- Dilute at 5 parts water to 1 part KLEEN
KRETE for use as a brick wash.
|
These are the primary applications and
suggested mix ratios for KLEEN KRETE. The ratios can be
varied up or down according to your results. For usage
instructions visit our Product
PDFs tab to download printable PDFs or Text versions. If you
have any
questions regarding a particular application or mix ratio, please feel
free to contact customer support at: 800.801.7832 or
support@4progressive.com.
- Removing Hardened Cement,
Concrete or Mortar
- Undiluted
- Use KLEEN KRETE to remove hardened
cement, concrete or mortar from a variety of surfaces. It is an
environmentally safe, easy to use alternative to traditional methods of
removing hardened cement.
- Concrete Buggies
- Concrete Forms
- Concrete and Mortar Mixers
- Hand Tools
- Precast Equipment
- Ready Mix Trucks
- Saw Cutting Equipment
- Screeds
- Troweling Machines
- Vehicles
- Cleaning and Etching
Concrete Floors - Surface Preparation
- Undiluted
- KLEEN KRETE is used to clean and etch
concrete floors prior to application of epoxy floor coatings or sealers.
- Brick and Masonry Wash
- 5 to 1
- KLEEN KRETE is used to clean masonry and MUST be used according to directions.
|
|
|
|
|
